Backyard swimming pools are actually very popular and the essence of summers and hiring pool contractors is your first instinct. However, you can build a swimming pool yourself which is quite easy if you take the following steps.
Choose a Site
Site inspection is pretty much the basic thing to do when deciding to get a pool. You must have a space big enough to accommodate a homemade swimming pool. Size it right according to the area. It is not necessary that you have a pool in your backyard but you can have it anywhere if you have enough space and some of the projects may actually need to you to remove some trees so keep that in mind.
Design Your Pool
Before getting to dig a hole in the ground by swimming pool builders, you must have a swimming pool design in mind. Not only that you also need to determine how deep it is going to be. There are a lot of ways you can shape and design your pool. From basic shapes like circle or rectangle to more complex shapes like diamond or anything. However, complex designs may cost a bit more to dig.
Shallow Is Better
Why your swimming pool should be shallow is because if you dig more than 2m, you will needing a lot of reinforcement. So, for people like you who are DIYing swimming pool, a depth of 1.5m to 1.8m is better.
Also, get your retaining wall checked by a professional to ensure safety. You should also use more concrete or steel for retaining wall for it to be strong enough.
Choose the Bottom
Flat and tilted bottoms are the ones that are used in a swimming pool. When you are making it yourself, you may opt to get a flat bottomed swimming pool. It is fairly easier to dig and even easier to fit a pool in it. Same level foundations can be fitted for your walls. All you need to do is choose the depth and dig a hole in your yard that deep.
If digging seems a lot to do, don’t worry as there are many types of pools and one of them is above ground pool. You can get a container pool that can be made out of different materials like steel. They stay above the ground and all they need is a good fitting. It is very popular these days and as you are making it yourself, you can customize it the way you want. They are just like a tank only for swimming.
Frame the Hole with Steel
When your pool area is dug up, it is pretty easy for them to crumble and having their shape disturbed. To avoid it from happening, make sure that have installed steel supports to hold the shape immediately. The flat ground and walls make for the best of pools so aim for that.
Plumbing and Electrical Fixtures
When all is done, you need a plumbing fix to have water pumped in and out of the pool in addition to the electricity. It is better that you call professionals for both plumbing and electrical work to be done.
All the necessary pipes and the water filtration system shall be done by them. Don’t forget the drainage system to have a clear flow into the sewerage system so that the drains don’t get clogged.
Electrical fixes need to be very safe because water and electricity together is not good news for anybody. Electricity is required mainly for your filtration system or any lighting you might want to have. Ask your pool contractors to have a safe electrical connection before setting the pool in.
Install the Pool
After you have lined the pool finally you can install the fiberglass frame into it. They are mostly available ready-made so all you need to do is find the right size and it will be installed. After a few days, a vinyl sheet will be fixed into the pool where it will be cut for any drain holes. It is a very easy process.
After all of that, you will have a swimming pool in your house. DIY swimming pools can be made but you may require assistance of swimming pool builders Long island from time to time.